Specification

• CAPACITY
  Max cone distance (30 degree angle and 300 mm cutter): 228 m
  Max extreme ratio: 10 to 1
  Max gear pitch diameter (30 degree spiral angle):
  -Ratio 10 to 1: 457 mm
  -Ratio 2 to 1: 406 mm
  -Ratio 1 to 1: 323 mm
  Diametral pitch (coarsest): 12,7 mod.
  Max full depth: 25,4 mm
  Max face width: 69,9 mm
  Number of teeth: 5 to 150

• WORK SPINDLE
  Diameter of taper hole at large end: 100 mm
  Taper per foot: 39/1600 mm
  Depth of taper: 150 mm
  Diameter of spindle nose: 137,5 mm

• CUTTER DIAMETER
  Diameter: 125 mm; 150 mm; 187,5 mm; 225 mm; 300 mm

• WORKHEAD SETTINGS:
  Max offset above center: 112,5 mm
  Max offset bellow center: 112,5 mm
  Distance from machine center to nose of spindle:
  -Max: 337,5 mm
  -Min: 62,5 mm
  SPEEDS AND FEEDS
  Cutter speeds: 20 to 115 rpm
  Feed (seconds per tooth): 9 to 80 seconds
  ELECTRICAL EQUIPMENT
  Voltage: 380 V, 50 Hz
  Feed motor: 5,5 kW
  Hydraulic motor: 3 kW
  Coolant motor: 1,5 kW
  MISCELLANEOUS
  Floor space: 2560×1980 mm
  Height: 1620 mm
  Net weight: 10977 kg
  Shipping weight (boxed for export): 11930 kg
  Size of case: 3040x2760x1950 mm

Specification

Cone Distance, maximum
0 To 35-Degrees Spiral Angle
7.5″ Cutter 1.25″ Face…………….. 4.25″/(108mm)
Pitch Diameter, Maximum (90-Degree Shaft Angle)
O To 35-Degree Spiral Angle
Ratio 10:1……………………….. 8.5″/(215mm)
Ratio 2:1………………………… 7.5″/(190mm)
Ratio 1:1………………………… 6″/(152mm)
Maximum Face Width………………… 1.25″/(32mm)
Diametral Pitch Maximum……………. 4 D.P./(6.3 Module)
Maximum Full Depth………………… .500″/(126mm)
(May Be Improved w/Special Cutters)
Displacement Of Cutter Zxis From Cradle
Axis…………………………….. 0 To 6″/(0-152mm)
Root Angle Setting………………… – 12 To 90 Degs
Index Range………………………. 5 To 97 Teeth
Cutter Diameters Utilized………….. 1.5,2,3.5,4.5,6,7.5″
(38.1,50.8,88.9,101.6,152.4,190.5mm)
Workhead Offset, Above/Below Center…. 3″/(75mm)
Sliding Base Adjustment:
Advance From Machine Centerline…….. 2″/(51mm)
Withdraw From Machine Centerline……. 3″/(75mm)
Distance Work Spindle Nose To
Machine Centerline………………… 1.25″-9″/(32-228mm)
Wk Spdl Taper Hole Dia. (Lg End)……. 3-29/32″
Wk Spdl Taper Hole Dia. (Lg End)……. (99mm)
Spindle Taper Per Ft………………. 39/64″/(1:18.5mm)
Depth Of Taper……………………. 6″/(152mm)
Diameter Of Spindle Thru-Hole………. 2-7/16″/(62mm)
Feed (Seconds Per Tooth)…………… 4.9 To 68.6
Cutter Speeds Ft./Min……………… 74-380/(25-133)
Main Motor Horsepower……………… 5 HP/1800 RPM
Coolant Pump Motor………………… 5 HP/3600 RPM
Hydraulic Pump Motor………………. .75 HP/1800 RPM
Floor Space Required………………. 61.25x 84.25″
Floor Space Required………………. (1556x2140mm)
Machine Approx Net Weight………….. 14,300 Lbs.
Machine Approx Net Weight………….. (6,500 kGs)